HINDUSTAN MOTOR

Features :
Standards :- IS:12615, IS: 1231 & IS: 2223
Mounting : Foot ( B3 ), Flange (B5),face(B14)& combinations
Voltage :- 415 V +/- 10& or as required
Frequency :-50 Hz +/- 5% or as required
Ambient :- 45 C
Altitude :-up to 100 m above m.s.l.
Enclosure :-Totally enclosed fan cooled (TEFC )
Protection :- IP 55
Insulation Class :-Class F insulation with temp. rise limited to class B.

Advantages :
• Saves energy and money
• Near uniform efficiency from 50% to 100% of full load ensuring energy savings weven at part load
conditions also.
• Short payback period
• Substantial savings after payback period

Range :
0.37 kW to 355 kW
2 to 8 Pole

Features :
Standards :- IS:12615, IS: 1231 & IS: 2223
Mounting : Foot ( B3 ), Flange (B5), face(B14)& combinations
Voltage :- 415 V +/- 10& or as required
Frequency :-50 Hz +/- 5% or as required
Ambient :- 45 C
Altitude :-up to 100 m above m.s.l.
Enclosure :-Totally enclosed fan cooled (TEFC )
Protection :- IP 55
Insulation Class :-Class F insulation with temp. rise limited to class B.

Advantages :
• Saves energy and money
• Near uniform efficiency from 50% to 100% of full load ensuring energy savings weven at part load
conditions also.
• Short payback period
• Substantial savings after payback period

Range :
0.37 kW to 355 kW
2 to 8 Pole

High Efficiency Flameproof Motors for Gas Groups IIA & IIB as per IS/IEC 60079

Features :
Frames :- 63 to 315L
Rating : 0.18 & 200.0 kw
Poles :- 2, 4, 6 & 8
Mountings :- B3, B5, B14 & combinations
Protection :- IP55
Enclosure :- TEFC

Construction
Brake Motors are used for various applications, where instantaneous stopping of the driven load is required. The operation of the brake is “FAIL SAFE TYPE” i.e. normally ON When the electrical power to the motor is cut-off or the power fails, the brake is applied.

Brake Motor is a combination of an A.C. induction motor and an electromagnetic AC or DC brake. The electromagnetic brake is mounted on the non-driving end of the motor.

DC brake motors are provided with a rectifier which provides the required DC voltage to the brake coil which in turn operates the brake. the supply to the rectifier is fed from any two terminals(between any two phases) in the main terminal box of the motor.

General applications of the Brake motors are printing machinery, textile machinery, rolling mills, cranes, Hoists, material handling equipments, machine tools etc.

Range of Hindustan Brand Brake Motors :
Kw : 0.18 to 55.0 KW
Pole : 2P, 4P, 6P, 8P
Mounting : B3, B5, B14 & combinations
Frame : 63 to 250MX
Motor Voltage : 415V+10% or as required
Frequency : 50Hz+5% or as required
Braking Torque: up to 800Nm
Brake Coil Voltage : 190V Dc (Other voltages on request)
Protection : IP54
Duty Cycle : S1 – S8

Application :
Hindustan Brake Motors can be used in many applications. A few of them are listed below:
• Machine Tools
• Textile Machinery
• Cranes & Hoists
• Printing Machinery
• Material Handling Equipments
• Geared Motors
• Cable Reeling Drums
• Rolling Mills

HMM have recently introduced a new series of motors – ‘Power Horse’ having frame size 280, 315 and 355 with the following features as a standard supply.

Features :
1. 1E2 efficiency class
2. Insulation class H
3. Dual coat wire for winding
4. PTC thermistors in the winding
5. Vacuum pressure impregnation for the winding
6. Bearing life 50000 hrs for directly coupled load through flexible coupling
7. High temperature grease
8. Epoxy base paint
9. *2* years additional warranty on winding against manufacturing defect

Cooling Tower Motors are specially designed, flange mounted motors in totally enclosed construction to suit air conditioning & refrigeration industries. They are provided with special long shaft construction with external threaded end to directly mount the fan blades. This also helps in the better cooling of the motor. Motors are compact in design & less in weight to facilitate easy maintenance. They are available as standard catalogue designs or as custom built.

Features :
Power :- 0.37 to 37.0 KW.
Polarity : 4P, 6P, 8P, 10P & 12P
Mounting :- B5 flange mounted
Frame Size :- 71 to 315
Voltage :- 415v + 10% or as required
Frequency :- 50Hz. + 5% or as required
Ambient :- 45oC
Altitude :- upto 1000m above msl
Enclosure :- Totally enclosed non ventilated (TENV) / TEFC
Protection :- IP55
Ins. class :- Class F with temp. rise limited to class B.
Duty :- S1

Introduction:
Crane Duty Motors are specially designed for frequent starts/stops & reversing required in ther cranes & lifts of all types. They can also be used in application such as – material handling, weirs & sluices, auxilary motors in rolling mills or wherever intermittent drives are required.

Range :
KW : 0.18 to 200.0 kW
Pole : 4P, 6P & 8P
Mounting : B3, B5, & B14 & combinations
Frame : 71 to 315LX
Voltage : 415v+10% or as required
Frequency : 50Hz.+5% or as required
Ambient : 50oC.
Altitude : Upto 1000m above msl
Rotor type : Squirrel cage aluminium die cast
Enclosure : Totally enclosed fan cooled (TEFC)
Protection : IP55
Ins. class : Class F insulation with temp. rise limited to class B.
Duty cycle : S3, S4 & S5

Range :
Frames : 100 to 180L
Rating : 0.55 to 15.0 kW
Poles : 4, 6, & 8
Mounting : B3, B5, B14, Pad & Combinations
Protection : IP55
Enclosure : TENV, TEFC with clean flow
Application : Ring, Loom, Carding, Ginning & Spinning

Range :
Frames : 90 to 355L
Rating : 0.37 to 315.0 kW
Poles : 2,4,6 & 8
Mounting : B3, B5, B14 & combinations
Protection : IP55
Enclosure : Totally Enclosed Force, Cooled with 3 ph fan motor

Multi Speed Flameproof Motors for Gas Groups IIA & IIB as per IS/IEC 60079
Hazardous area’s are defined as those locations where explosive gas – air mixture may occur in dangerous concentrations and are defined in accordance to Indian Standard IS 5572.

Customers are to select the motor type depending on the type of area of operation of the motors and should generally follow the guidelines given above in conjunction with the relevant Indian Standards specified above.

Classification of Hazardous Gases :Hazardous gases have been classified in IS/IEC 60079-0 and IS 5572 are associated with only Flame Proof Motors as listed below Note: FLP Motors are offered suitable for Gas Groups IIA and IIB only. Any other gas not specified, one has to refer relevant IS for the motor selection.
Features :
Frame Size :- 71 to 315L
Rating :- 0.12 to 120.0 KW.
Pole : 4/2, 8/4, 6/4, 8/6 & others
Mounting :- B3, B5, B14 & combinations
Protection :- IP55
Enclosure :- TEFC

Features :
Frames : 63 to 160L
Rating : 0.037 to 5.5 kW
Poles : 4, 6, & 8
Mounting : B3, B5, B14 or special
Protection : IP55
Enclosure : Totally enclosed or force cooled
Torque : 0.048 to 3.57 kg.m

Features :
Frames : 63 to 160L
Rating : 0.037 to 5.5 kW
Poles : 4, 6, & 8
Mounting : B3, B5, B14 or special
Protection : IP55
Enclosure : Totally enclosed or force cooled
Torque : 0.048 to 3.57 kg.m