ALTRA GEARBOX

We Are The Largest Stockist For Premium Make Light Weight Aluminium Gearboxes , Popularly Termed As “ Altra Gearboxes” .

Aluminium Body Altra Gearboxes Are Dimensionally And Technically Same To Their European Equivalents, And We Provide Them At Very Economical Rates Compared To Their Counterparts.

Premium Altra Gearbox Product Specifications :

  • Aluminium Alloy Composes The Housing, Flanges And Feet Upto Size 90, And Cast Iron Is Used For The Sizes 110 And Above.
  • Steel Is Used For The Wormshaft And Case Hardened To 58-60 HRC And Profile Ground.
  • The Worm Wheel Is Composed Of G20 Cast Iron Hub Upon Which A Casting In AB1 Bronze Rim Is Fitted.
  • Synthetic Oil Grade : ISO VG 320

Premium Altra Gearbox Product Specifications :

  • Aluminium Alloy Composes The Housing, Flanges And Feet Upto Size 90, And Cast Iron Is Used For The Sizes 110 And Above.
  • Steel Is Used For The Wormshaft And Case Hardened To 58-60 HRC And Profile Ground.
  • The Worm Wheel Is Composed Of G20 Cast Iron Hub Upon Which A Casting In AB1 Bronze Rim Is Fitted.
  • Synthetic Oil Grade : ISO VG 320

Key Points :

1)NoMaintainanceGearboxes
2) Oil Lubrication Setup For Life

Premium Altra Gearbox Technical Specifications :

PowerRange: 0.06kW–7.5kW
Size: ALM25–ALM150
RatioRange: 5:1–100:1
Torque Range : 2.7 Nm- 2210 Nm

Applications :Textile , Rotational Moulding , Ceramic Industries, Tables, Conveyors, Milk Manufacturing Machines, Pharma Machinery And In Various Other Light Weight Machinery.

Worm Gearbox

Backed By Rich Industrial Expertise, We Offer A Wide Range Of Worm Gearboxes Of The Finest Quality.
Keeping In Mind The Distinctive Performance Specifications For Industrial Purposes, All Of Our Worm Gearboxes Are Manufactured From Superior Quality Material .
High Torque At Low Speed Ratio , Can Be Achieved With Worm Gearboxes.
When Compared To The Helical Gearboxes , Though Compact And Simple In Design , These Gearbox Can Reach Higher Gear Ratios.
Based Upon The Requirement , They Can Be Right Handed Or Left Handed.
Worm Gearbox Is Made Up Of Close Grain Cast Iron Which Can Be Operated In Open Due To Its Dust-Proof And Oil Tight Properties With A Construction Of Ideal Alignment.
The Similarity With The Helical Gear Is Its Quality – Screw Type While It Has A A Higher Helix Angle As Well As A Longer Body Axially.
Backed By Rich Industrial Expertise, Santram Engineers Offer A Wide Range Of Worm Gearboxes Of The Finest Quality.
Keeping In Mind The Distinctive Performance Specifications For Industrial Purposes, All Of Our Worm Gearboxes Are Manufactured From Superior Quality Material .
The British / Indian Design Grades Are Applied .

Worm Gearboxes Technical Product Specifications :

  • Compact In Size.
  • To Transmit Torque At An Exact Angle, It Is Manufactured Using Profile Ground And Case Hardened Screw Thread Which Meshes With Smoothly Finished Bronze Wheel .
  • Superior Torque And Speed Performance.
  • High Effeciency And Load Bearing Capacity.
  • Perpendicular Drives ( Input To Output ).
  • Lower Effeciency Beyond The Ratio Of 40:1
  • Irreversible Beyond The Ratio Of 60:1
  • Require Semi-Skilled Manpower For Maintenance

Worm Gearboxes Technical Specifications:

Powerrange: 350KW
Reductionratiorange :5/1to4900/1
Sizes: Upto2800mmCentreDistance
Types : Under Driven / Over Driven / Vertical Units In Single  And Double Reduction, NU, Shaft Mounted
Special Versions : Twin Output Shaft , Screw jack , Lift Duty , NU_Vertically Upwards

Worm Gearbox Features :

  • High Wear Resistance / Strength .
  • Easy Mounting Due To Compact Design.
  • Maintenance – Low
  • Lubrication – Special Maintenance Not Required Except
  • Oil Topup To Required Level.
  • High Durability / Efficacy
  • Load Bearing capacity – High

U type Horizontal Worm Gearbox

Premium Speed Reducers are of substantial construction, combining rigidity with strength. The worm is of high quality case-hardening steel, accurately generated, ground and super-finished. The worm wheel comprises a phosphor bronze centrifugally cast rim of substantial section welded to a rigid centre, which is pressed and keyed to the shaft. Shafts are located on dual purpose bearings of ample capacity and having a substantial margin on output shafts for accommodating overhung loads.Lubrication is positive at all speeds, in either direction of rotation and apart from an occasional oil check, no attention is necessary in service.

Modular Worm Gearbox

This range of units of 4”, 5”, 6”, 7”and 8” centers is based on a single universal case for each size, giving a high degree of common parts and interchangeability. Under-driven, over-driven and vertical types meet the requirements of a wide variety of applications. All units are fitted with a double extended input shaft, allowing handing to be changed by shifting only fan and cowl from one end to the other. The Modular worm series offers a choice of twelve standard ratios varying from 5/1 to 70/1. Important features include high efficiencies and load-carrying capacities combined with long life and reliable service.

V Type Vertical Worm Gearbox

Premium Speed Reducers are of substantial construction, combining rigidity with strength. The worm is of high quality case-hardening steel, accurately generated, ground and super-finished. The worm wheel comprises a phosphor bronze centrifugally cast rim of substantial section welded to a rigid centre, which is pressed and keyed to the shaft. Shafts are located on dual purpose bearings of ample capacity and having a substantial margin on output shafts for accommodating overhung loads.Lubrication is positive at all speeds, in either direction of rotation and apart from an occasional oil check, no attention is necessary in service. Units are handed ‘R’ and ‘L’ with the suffix ‘X’ or ‘Y’ denoting position of slow speed shaft extension. These are shown in the diagrams on the following page and references should be quoted when ordering.

O Type Over Driven Worm Gearbox

Premium Speed Reducers are of substantial construction, combining rigidity with strength. The worm is of high quality case-hardening steel, accurately generated, ground and super-finished. The worm wheel comprises a phosphor bronze centrifugally cast rim of substantial section welded to a rigid centre, which is pressed and keyed to the shaft. Shafts are located on dual purpose bearings of ample capacity and having a substantial margin on output shafts for accommodating overhung loads.Lubrication is positive at all speeds, in either direction of rotation and apart from an occasional oil check, no attention is necessary in service.

Extruder Gearbox

Single Screw Extruder Gearboxes

Single Screw Extruder gear units of Premium Transmission make are quite capable to transmit the high torque required for pressurising and plasticising moulding materials and also to absorb the high axial thrust load through built-in spherical roller thrust bearing. The axial bearing housing is standardised to accommodate suitable thrust bearings and corresponding output shafts with key are splined. The parallel shaft double reduction models – horizontal and vertical serve the characteristic requirements of the Extruder Gearbox.To incorporate the thrust screw , different thrust bearings with different bores are mounted on the output shafts (hollow) .The modular design permits the interchangeability of the parts.

GHE Series

Features :

  • Ratio : 5.06 – 25.6:1
  • Fully Metric
  • Unicast housing for <160 unit size
  • Split housing for >160 unit size
  • Single keyway provisions for output bores and can be customized as per the requirement with double keyway or splined bores.
  • Cooling coil provisions – optional
  • Handing – Left / Right
  • Mounting – Horizontal / Vertical
  • Roller bearing from renowned manufacturers
  • ISO:9001
  • Minimal noise & wear due to self-contained lubrication.

EP Series

Features :

  • Ratio : 5.06-25.6:1
  • Fully Metric
  • Split Housing
  • IS:2048 / DIN:6885-1/ISO/R773 confirmation for keys and keyways
  • Single keyway provisions for output bores and can be customized as per the requirement with double keyway or splined bores.
  • Cooling coil Built-in
  • Handing – Left / Right
  • Mounting – Horizontal / Vertical

Twin Screw Extruder Gearboxes

Twin Screw Drives offer the dual shaft counter rotating Extruder gear units. The twin screw extruder gearboxes both co-rotating and counter rotating variants are available. The gearboxes of the are designed for a wide range of applications and requirements, starting from the typical applications for revolutions of 290 to max. 890 rpm. to where lower revolution rates from 23 to max. 195 rpm. The range is available for various centre distances, please call to confirm. On request, also bigger versions can be built.

High torque and high speed output rate feature in our range of Twin Screw Extruder Gear Box .

To work under heavy loading force , the high level dissipation and oil lubrication system are provided with. The axial roller type swivel thrust with the thrust bearing coupled in tandem way support the axial thrust.

Features :

  • High Torque
  • High outspeed speed rated design
  • Transmission efficiency and sufficient safety co-efficient
  • Highest Heat dissipation due to the forced lubrication
  • Built-in cooling and filter system
  • Low noise
  • Minimum rotation vibration

 

The Core Technology Of Any Extruder Is In The Gear.

Santram Engineers Brings To The Extrusion Systems – The Non-Compromising High Quality Extruder Gearbox , As The Failures And The Permanent Strains Due To The Drive Torques Which Are Extreme Can Create Great Economic Risks To The Operator Due To The Delay.

Having Proven The Efficacy Of Extruder Gearbox By Santram Sets The Reliability Standards Which Are Unparalleled With Utmost Client Satisfaction.

Santram Engineers Private Limited Is A Prominent Name In The Industry Since 26 Years.

Owing To Our Experience And Coupled With Modern Technology And Experience, We Offer The Finest Gearboxes Of Exceptional Quality And Premium Choice For Dependable Services To Our Clientele.

These Gearboxes are fabricated using cast iron/ casing with case hardened and profile ground gears and pinions.

Extruder Gearbox Product Specifications :

  • Greaves Make “GHE” Series Extruder Gearboxes Give High Performance.
  • The Built-In Spherical Roller Thrust Bearing Absorb The High Axial Thrust Load , Allowing These Gear Units To Transmit The High Torque Necessary For Plasticizing And Pressurizing Molding Material.
  • Easy To Install.
  • To Accomodate The Suitable Thrust Bearings,The Axial Bearing Housing Of The Extruder Gearbox Is Standardized And The Corresponding Output Shafts That Come With The Key Are Splined.
  • We are engaged in providing a wide range of gearboxes, which is used in plastic and PVC extrusion. These GHE series Greaves make gearboxes are high performing and easy to install. The high torque necessary for plasticizing and pressurizing molding material can be transmitted with the help of these gear units. Through built-in spherical roller thrust bearing, the gear unit transmits high torque to absorb the high axial thrust load.
  • Moreover, to accommodate suitable thrust bearings, the axial bearing housing is standardized and the corresponding output shafts which come with key are splined.
  • Shaft Extension Keyway : IS:2048
  • Maximum Operating Reliability
  • Low Noise And Smooth Running
  • They Can Also Be Driven Via Two Motors
  • The Standard Motors Are Made use Of

Extruder Gearbox Technical Specifications:

PowerRange: upto500kW
ReductionRatio: 5.06:1–25.6:1
Sizes: Upto450mmCentreDistance
Types: SingleScrew/TwinScrew
Handing: LH/RH
Mounting: Horizontal/Vertical
Torque : 1560 Nm – 15550 Nm

Installation Solutions :

The Installation Procedures Are Universal

Extruder Gearbox Applications :

  • Plastic Extrusion
  • PVC Extrusion
  • For The Pipe And Cable Coating Systems
  • In The Packaging Industry For The Film Blowing Systems.
  • For The Plastic Containers Blowing Systems
  • In The Automotive Industry – Fuel tank Production
  • Rubber Profile Extruders
  • For The Production Of Flat Film

Bevel Helical Gearbox

ADITI ELECTRICAL Has A Massive Clientile To Whom It Has Been Supplying Helical Gearboxes As Per Their Specific Requirements.

The High Technicality In The Standard Of Engineering Due To Its Construction And The Design (Modular) Gives An Optimal Performance Output .

Specialized In Providing Prize-Winning Helical Gearboxes & Bevel Helical Gearboxes, Our Company Provides A High Degree Of Effeciency Gearboxes To Our Clients.

Today’s Various Applications Demands In Various Power Sectors – Medium / Heavy Duty Can Be Met By These Gearboxes.

The Replaceability Of Various Assemblies And The Maintenance Is Done By A Diligent Team Of Santram Which Has Highly Skilled Manpower For The Maintenance Of Gearboxes .

Industrial Helical & Bevel Helical Gearbox Product Specifications :

  • Case Hardened And Lapped Steel Spiral Bevel Gearboxes Are Provided For Torque Transmission Between The Right Angle Shaft At The First Stage.
  • High Efficiency Attainable At All The Ratios.
  • Perpendicular Gears (Input To Output) Available.
  • Helical Gearboxes Are Provided Through Other Stage Transmissions.
  • All Throughout , The Roller Bearings Are Used.
  • Suitable For Most Applications In Both Horizontal And Vertical Drives
  • High Quality Alloy Case Hardening Materials Provide Fatigue Strength And Wear Resistance
  • Low Noise
  • The Geometrical Design Of Gear Tooth Provides High Effeciency With Maximum Load Bearing Capacity.
  • Easy Maintenance.

Industrial Bevel Helical Gearbox Technical Specifications:

Power range : 0.6 – 5500 KW
Reduction ratio range : Upto 650:1
Torque : Upto 1,20,000 Nm
Mounting : Foot / Shaft
Shafts : Right Angle / Parallel

Helical Gearbox:

  • Power :Upto 5500 kW
  • Reduction Ratio :Upto 650:1
  • The Inclined Tooth For Torque Transmission Between Parallel Or Right Angle Shafts With Case Hardened Profile Ground Steel Gears Ensure minimum Noise
  • Size :112 mm – 710 mm Centre Distance
  • Industries :Sugar , Cement , Paper , Solvent Extraction, Steel Industry , Conveyore , Agitators, Mines & Minerals , Cranes , Crushers , Fin Cooler Drives , Aerators , Kneaders, Thickeners , Larger Ball Mills Power Plants , Rubber.

Modular Heavy Duty Helical Gearbox :

Power : Upto 5000 kW

  • Reduction Ratio :Upto 450:1
  • Type :Parallel Helical
  • The Inclined Tooth For Torque Transmission Between Parallel Or Right Angle Shafts With Case Hardened Profile Ground Steel Gears Ensure minimum Noise
  • Size :6 To 18
  • Industries :Sugar , Cement , Paper , Solvent Extraction, Steel Industry ,  Mines & Minerals , Power Plants , Rubber.

Modular M- Series Helical Gearbox :

  • Power :Upto 5000 kW
  • Reduction Ratio :Upto 450:1
  • Type : Helical & Bevel Helical Gearbox In Horizontal , Vertical And Upright Models
  • The Inclined Tooth For Torque Transmission Between Parallel Or Right Angle Shafts With Case Hardened Profile Ground Steel Gears Ensure minimum Noise
  • Size :6 To 18
  • Industries :Sugar , Cement , Paper , Solvent Extraction, Steel Industry , Mines & Minerals , Power Plants , Rubber.

Bevel Helical Cooling Tower Gearbox :

  • Power :Upto 650 kW
  • Reduction Ratio :Upto 20.9:1
  • Type :Parallel Helical
  • The Inclined Tooth For Torque Transmission Between Parallel Or Right Angle Shafts With Case Hardened Profile Ground Steel Gears Ensure minimum Noise
  • Size :140 – 450 mm Center Distance
  • Case Hardened And Lapped Steel Spiral Bevel Gears To Transmit The Torque Between Right Angle Shaft .
  • Unicase Design With Pumpless Lubrication And Three Point Foundation
  • Applications :Cooling Tower And Heat Exchanger
  • Industries :Sugar , Cement , Paper , Solvent Extraction, Steel Industry ,  Mines & Minerals , Power Plants , Rubber.

Other Features

  • Gearing Of High Efficience
  • Energy Saving
  • Spill-Proof Motor Removal
  • Mounting Options – Foot / Flange/Shaft Mount

Key Point :

  • Our Bevel Helical Gearbox Range Has Been Majorly Used For Extreme Power Transmission System Which Is At Least More Than 50KW, Achieving An Ascent In Efficiency. They Also Have A 5500KW Power Range Specifically Designed For Cement Plants And Sugar Mills.

Reduction Stages : Single/Double/Triple/Quadruple

Applications :

Bevel Helical Gearbox Can Be Used In Various Fields Such As:

  • Toasters
  • Coal Pulverizing Mills
  • Cooling Towers
  • Conveyors
  • Agitators
  • Crushers
  • Cranes
  • Fin Cooler Drives
  • Kneaders
  • Larger Ball Mills
  • Mixers
  • Bucket Elevators

Industries:

These Helical & Bevel Helical Gearboxes Can Attain High Efficiency Ratios , And Are Thus Used In Extreme Power Transmission Systems.

Some Of The Industries Applicable For Bevel Helical Gearboxes Are :

  • Thermal power plant
  • Sugar industry
  • Cement industry
  • Paper industry
  • Solvent extraction plants
  • Plastic industry
  • Rubber industry
  • Steel Industry
  • Chemical Plants
  • Mines and minerals

Cooling Tower Gearbox

The Cooling Tower Demands Different Operational Requirements From A Gearbox, ADITI ELECTRICAL Being Into The Power Transmission Industry For More Than 3 Decades , Understands And Has Grown Upon To Provide As The Demand.

Be It For Operating Large Diameter Axial Fans , The De-icing – Reverse Processing , High Temperatures On Operation , Or A Very Humid Environment – ADITI Provides The Solution With The Best Quality Cooling Tower Gearbox.

Cooling Tower Gearbox Product Specifications :

  • Case Hardened And Lapped Steel Spiral Bevel Gearboxes Are Provided For Torque Transmission Between The Right Angle Shaft.
  • Our Cooling Tower Gearboxes Have A Unicast Case, Three-Point Foundation With Pump Less Lubrication, Which Is Unique In Design
  • It Has A Combination Of Labyrinth Double Oil Seal Arrangement At Fan End With Double Oil Seal At Motor End.
  • Taper/Cylindrical/Spherical Roller Baerings Are Used.
  • The Standard Direction Of Rotation Is “Clockwise” At Both The Input/Output Shafts When Viewed Onto Respective Shaft End.

Cooling Tower Gearbox Technical

Specifications :

Power Range : Upto 600kW
Reduction Ratio : Upto 15.4 : 1
Sizes : 140 – 450mm Centre Distance
Reduction Stages : Single/Double
Service Factor : Minimum 2.0 ( As Per AGMA / CTI Recommendation )
Special Fabrication As Per Custom Built Available

Single Reduction Right Angle Cooling Tower Gearbox

Reduction:1Stage
Power:5–10kW
Ratio : 2 – 10:1

Double Reduction Right Angle Cooling Tower Gearbox

Reduction:2Stage
Power:40–380kW
Ratio : 7:1 – 20:1

“A”SeriesCoolingTowerGearbox
MountingHolesInTheGearCase
ShaftMotorAlignedHorizontally
Helps In The Replacement Of Gear Drives

Drive Shafts:The Torque Transmission Required To Rotate The Fan ( Of Cooling Tower ) ,The Connecting Link Between The Input Shaft Of Gearbox And The Electric Motor Is Provided By The Drive Shafts.
Helps Achieve Optimal Performance.

Cost Effective – The Foot Patterns Of Gear Housing Are Identical – Support Of Tower Gear Drive And The Fan Pitch Adjustments Unnecessary .

WarrantyTerms:The Cooling Tower Gearboxes Provided By Santram Engineers Have A Guaranty Of 12 Months After The Installation Against Any Defect In Material Or Workmanship When Operated Under The Appropriate Conditions .

RotationalDirection:Clockwise Rotation Of Both Shafts – Under Normal Conditions .
Occasionally The Counterclockwise Rotation Of Both The Shafts Is Permitted.

If The Primary Rotational Direction Requirement Is Counterclockwise / Shaft Need To Rotation In Opposite Directions – Provided Upon Order.

OutputShaft:Cylindrical Output Shaft / Tapered Output Shaft

REQUEST A QUOTE

 

Applications :

  • Cooling Towers
  • Heat Exchangers

Industry :

  • Cement
  • Paper
  • Solvent Extraction
  • Sugar
  • Steel
  • Power Plants

Planetary Gearbox

The Planetary Motion Is The Principle For The Planetary Gearbox.
The Accurately Positioned And Meshed Planet Gears (3) With The Sun Gear In The Centre And The Internal Teeth Of The Outer Ring Gear Compose Each Stage Of A Planetary Gearbox.
The Sun Gear Gets The Input While The 3 Planet Gears Provide The Ouput Via A Planet Carrier .

The Torque Handling Capacity Is Very High Because Of Its Flexibility , And A Very High Weight /Volume Ratio , Thus It Lends Its Application In Various Industries – Specifically In High Torque Requirements Making It The Most Economical Solution.
ADITI ELECTRICAL Is A Preeminent Name In The Power Transmission Product Industry.
Being A Proud Supplier Of Planetary Gearbox, We Provide An Excellent Distinguished Service To Our Clientele.

Planetary Gearbox Product Specifications :
• Provides High Torque At Slow Speeds.
• Our Range Of Gearboxes And Geared Motors Are Manufactured As Per The American Gear Manufacturers Association (AGMA) Standards.
• The Shafts Are Made Up Of Hardened And Tempered Special Alloy Steel.
• Sun And Planet Gears Are Made Of Case Carburised And Ground Alloy Steel.
• Ring Gears Are Made Up Of Forged Alloy Steel.
Best Load Sharing Because Of Accurate Positioning Of Planets.
• Low Noise Levels.
• No Oil Leakage.
• Good Quality Taper Roller Bearings For Input And Output Shafts.
• Very High Efficiency

Planetary Gearbox Technical Specifications :
Power Ratings : 0.12 kW – 1500 kW
Ratio Range : 3.75:1 – 2354:1
High Performance Gearboxes Available Upto 25000:1
Reduction Stages : Single, Double,Triple,Quadrauple ..
Mounting :
• Foot Mounting Flange
• Flange Mounting
• Agitator Mounting
• Shaft Mounting
Output :
• Standard Shaft
• Hollow Output Shaft
• Hollow Shaft With Shrink Disc
Input :
• Free Input
• Non-Standard
• IEC Frame Size Hollow Input
The Planetary Gears Offered By Santram Engineers Are High In Performance , Compact Speed ReducersbasedOnModularDesign,
The Nominal Torque Value Available At Reduction Ratios Of Various Range Make It Suitable For A Variety Of Applications.

The Planetary Motion Is The Principle For The Planetary Gearbox.
The Accurately Positioned And Meshed Planet Gears (3) With The Sun Gear In The Centre And The Internal Teeth Of The Outer Ring Gear Compose Each Stage Of A Planetary Gearbox.
The Sun Gear Gets The Input While The 3 Planet Gears Provide The Ouput Via A Planet Carrier .

The Torque Handling Capacity Is Very High Because Of Its Flexibility , And A Very High Weight /Volume Ratio , Thus It Lends Its Application In Various Industries – Specifically In High Torque Requirements Making It The Most Economical Solution.
ADITI ELECTRICAL Is A Preeminent Name In The Power Transmission Product Industry.
Being A Proud Supplier Of Planetary Gearbox, We Provide An Excellent Distinguished Service To Our Clientele.

  1. Small Size Planetary Gearbox :
  • Torque Range :Upto 3600 kNm
  • Planet , Sun Gears Made Of High Alloy Steel
  • Optimum Strength / Wear Resistance Achieved By Heat Treatment For Case Carburizing
  • Optimized Maximum Root Strength/Reduced Noise Level – Achieved By Ground Gear Profiles
  1. Planetary Mill Gearbox
  • Torque Range :Upto 4072 kNm
  • Planet , Sun Gears Made Of High Alloy Steel
  • Optimum Strength / Wear Resistance Achieved By Heat Treatment For Case Carburizing
  • Optimized Maximum Root Strength/Reduced Noise Level – Achieved By Ground Gear Profiles
  • High Efficiency – Provided By Minimum Sliding Contact
  1. Modular Planetary Gearbox
  • Torque Range :Upto 3600 kNm
  • Planet , Sun Gears Made Of High Alloy Steel
  • Optimum Strength / Wear Resistance Achieved By Heat Treatment For Case Carburizing
  • Optimized Maximum Root Strength/Reduced Noise Level – Achieved By Ground Gear Profiles
  • High Efficiency – Provided By Minimum Sliding Contact

Aerator Duty Gearbox

ADITI ELECTRICAL Is The Most Acclaimed Name When It Comes To The Quality Gearboxes.The Aerator Gearbox Are Used For Transmission Purpose .

The Gearbox Is Designed And Selected In Accordance To The Client Requirement With The Performance Protocol As The Priority. Premium (Earlier Radicon / Greaves ) Made Aerator Gearbox Are Made Of The Highest Quality Raw Material With The Most Advanced Technology , And Tested On Various Different Parameters By The Quality Examiners.

To Cater The Specific Characteristic Requirements In Aerator Applications , Our Company Offers A Wide Range Of Aerator Gearbox.

The “GA” Series Parallel Shaft Vertical Gear Functions In Triple Reduction To Fulfill Its Application.

  • As Per The AGMA Standards,The Service Factor Of 1.75 And 1.5 For Gearboxes And Shaft Power For Oxidation Ditches , And The Latter For The Mixed Tank ( Complete )
  • High Efficiency On Each Stage ( Not Less Than 99% ).
  • Alloy Steel Is Used In Manufacturing Of Pinion Shaft / Gears.
  • Low Noise
  • Low Vibration Level
  • In The Gearboxes For The Torque Higher Than 5000 KN , For The Perfect Lunrication – Mechanical Oil Pump Is Provided For Ensuring The Lubrication Of Bearing – To Avoid The Oil Leakage, The Inverted Dry Well Can be Provided.
  • The Lifting Lugs Fit To The Gearboxes With The Oil Level Indicator And Removal Of Oil Connection Facility Is Highly Recommended.
  • The Protection Film Secures The Internal Surface For Long Term Storage.

Our Range Of Aerator Gearbox Have The Following Key Features :
1) High Performance
2) Easy Installation
3) Low Maintenance

 

Aerator Duty Gearboxes Technical Specifications :

Power: Upto125kW
Size: 112–250
Ratio Range : 25.6:1 – 42.5:1

Aerator Duty Gearboxes Applications :

  • Aerator
  • Water Filtration